cable@sxwqgb.com    +8613892838980
Cont

Have any Questions?

+8613892838980

Sep 04, 2023

Technical Requirements For Wind Power Cable

Wind turbines operate in harsh environments, which generally have a wide temperature range (about -40 ° C to 50 ° C) and are exposed to maximum ultraviolet radiation. Therefore, to achieve the expected service life, the special cable used needs to be able to withstand low temperatures of -40 ° C and resist ultraviolet radiation. For moving parts in the fan, the cable should have excellent torsional and bending flexibility and a small bending radius.

 

Cables also need to be resistant to fuel, refrigerant, oil, corrosive chemicals and wear. If the wind field is onshore or offshore, the cable must also be resistant to high salinity. For safety reasons, in addition to the above requirements, the cable is also required to be flame retardant. In some cases, other features such as low-smoke, zero-halogen (LSZH) materials and EMI protection are also required.

 

wetcab2v7

 

In summary, the cables used in wind power applications should generally meet the following requirements:

 

(1) Wire: In order to maximize flexibility, it is recommended that design engineers only use multiple strands of annealed soft copper wire. In bending and winding applications, short concentric strand construction is used; In the application of torsion winding, long concentric stranded wire is used. Wires with an area greater than 6mm2(10AWG) require a composite stranded wire structure.

 

(2) Insulation: In order to increase low-temperature flexibility, thermoplastic rubber (TPE), ethylene-propylene rubber (EPR, a kind of EPM or EPDM) or silicone rubber (SiR) are usually selected as insulation materials to resist ozone corrosion and aging caused by heating. PVC/ nylon insulation is also widely used due to its high dielectric strength.

 

(3) sheath: the cable sheath can be thermosetting compounds such as polyvinyl chloride (CPE), polychloroprene (neoprene), chloro-sulfonated polyethylene (CSPE) synthetic rubber; It is also similar to thermoplastic compounds such as TPE, TPE-PVC alloy and polyurethane. These materials are resistant to oil, fuel and solvent corrosion, and have excellent flexibility at low temperatures. This property makes it an ideal sheathing material for wind power cables.

offshore-cables-marine-to-land

 

 

Send Inquiry